Product Code: 9542432
Availability: In Stock
$13.99
Ex Tax: $13.99

Product Description

Overview
1. The ESP-12F is a WiFi module based on ESP8266, with built-in 32Mbit Flash, in the small SMD22 package. There’re also onboard PCB antenna and metal shield. In short, it’s a small form factor and fairly high cost effective WiFi module.
2. With the pre-flashed AT firmware, you can control the module through UART AT commands easily. The module integrates MCU inside, supports other developments like Lua/Micropython/Arduino to achieve flexible and fast prototyping, make it easy to integrate the module into IoT applications.

Features
1. 802.11b/g/n Wi-Fi+BT SOC
2. Integrated Tensilica L106 ultra-low-power 32-bit micro MCU, run at 80 MHz and 160 MHz frequency, supports RTOS
3. Built-in 1-ch 10 bit high precision ADC
4. Supports UART/GPIO/ADC/PWM/I2C
5. SMD22 package
6. ntegrated Wi-Fi MAC/ BB/RF/PA/LNA
7. Supports multi sleep modes, deep sleep current as low as 20uA
8. UART baudrate up to 4Mbps
9. Embedded Lwip protocol stack
10. Supports STA/AP/STA+AP operation mode
11. Supports Smart Config (APP) / AirKiss (WeChat), one key networking
12. Supports UART local firmware upgrade and/or remote firmware upgrade (FOTA)
13. AT commands for getting started fast
14. Supports secondary development, integrated Windows / Linux environment

Applications
The ESP-12F suit for IOT applications such as:
1. Smart home
2. Intelligent building
3. Industrial automation
4. Wearable devices
5. IP camera
6. Intelligent agriculture

Specifications
1. WIFI chip: ESP32
2. Built-in Flash: 32Mbit
3. Package: SMD22
4. Antenna: Onboard PCB antenna
5. Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
6. WIFI protocol: 802.11b/g/n WiFi
7. Bluetooth: N/A
8. WIFI mode: STA, AP, STA+AP
9. Security: WPA / WPA2
10. Encryption: WEP / TKIP / AES
11. Firmware upgrade: UART / OTA
12. Transmitting power: 802.11b: 16 ±2dBm(@11Mbps);8 02.11g: 14 ±2dBm(@54Mbps); 802.11n: 13 ±2dBm(@HT20,MCS7)
13. Receiving sensitivity: CCK,1Mbps: -90 dBm ;CCK,11Mbps: -85 dBm ;6Mbps(1/2 BPSK): -88 dBm ;54Mbps(3/4 64-QAM): -70 dBm; HT20, MCS7(65Mbps, 72.2Mbps): -67 dBm
14. Power: Continuous Transmission: ~80mA (peak: 300mA) ;Deep Sleep:~6.5uA
15. UART baudrate: 300 ~ 4608000 bps (default 115200bps)
16. Operating temp: -20 ? ~ 85 ?
17. Storage condition: -40 ? ~ 85 ?, < 90%RH
18. Dimensions: 24x16x3 (mm)
19. Weight: 2g
20. Packing List: ESP-12F x1



Write a review

Note: HTML is not translated!